NEW ITEMS ON OUR REVERB.COM STORE

CHECK THEM OUT

Hello...

It looks like you are visiting our site on a browser that is really old. Unfortunately, this means you can't get the full experience. It'd be awesome if you could upgrade to a modern browser, especially Chrome and Firefox as that is the best out there right now.

Copyright 2014. All Rights Reserved.

    AmpTechTools

    AmpTechTools
    Show
    Set Descending Direction

    These sure need no explanation. The venerable chopstick has been used to troubleshoot noise in PTP amps for as long as I can remember. Just make sure you don't use it to eat with and get it all wet before you start poking around in an amp.

    Package of 5

    Out of stock

    Nothing like having a bag of alligator clipleads handy while working on a new design. I use a ton of them in all different sizes and colors. 20ga wire and each package contains 2 Black, 2 Red, 2 White, 2 Yellow, and 2 Green. These things are indispensable for amp techs, hobbyists, and builders. You might as well buy a bunch of these because if you are like me, no matter how many I buy they seem to disappear eventually.

    Package of 10

    Out of stock

    Screwdriver, 8", flat, hardened tip. Tip is 3/8" wide by .030" thick.

    Decent, low cost tool

    Screwdriver, 8", flat, hardened tip. Tip is 1/2" wide by .040" thick.

    Decent, low cost tool

    Screwdriver, 8", Philips (#2), hardened tip.

    Decent, low cost tool

    Diagonal Cutters, 6", with insulated handles.

    Decent, low cost tool

    Long Nose Pliers, 6", with insulated handles.

    Decent, low cost tool

    Automatic Wire Strippers, #24ga to #10ga.

    Decent, low cost tool

    Manual Wire Strippers, #26ga to #12ga.

    Decent, low cost tool

    The Snuffer Stick is used to discharge high voltage after you remove power from the amp. It has two 180K, 2 watt resistors in series with the nose probe and ground wire (360K total). It will safely discharge the high voltage supply within three to five seconds. It is best to use a meter to measure the voltage while you have the discharge stick in place, and only remove the stick when the voltage is drained.

    Clip to the chassis for ground, then hold on your filter caps to discharge dangerous high voltage present when you turn off your amp.

    Capacitor Substitution Box, Silver Mica capacitors, 15 values, 47pF - 1000pF @ 500VDC.

    Use: Tone stack, frequency shaping, etc.

    Capacitor Substitution Box, Weber polyester capacitors, 12 values, .001uF - .22uF @ 630VDC.

    Use: Tone stack, interstage coupling, bypass.

    Capacitor Substitution Box, Weber polypropylene capacitors, 12 values, .001uF - .22uF @ 630VDC.

    Use: Tone stack, interstage coupling, bypass.

    Capacitor Substitution Box, ceramic capacitors, 12 values, .001uF - .22uF at 1KVDC.

    Use: Tone stack, interstage coupling, bypass.

    Capacitor Substitution Box, electrolytic capacitors, 12 values. .1, .22, .33, .47, .68, 1, 2.2, 3.3, 4.7, 6.8, 10, 16 uF @ 50VDC.

    Use: Preamp and power amp cathode bypass, low values.

    Capacitor Substitution Box, electrolytic capacitors, 12 values. 6.8, 10, 16, 22, 33, 47, 75, 100, 150, 220, 330, 470 uF @ 50VDC.

    Use: Preamp and power amp cathode bypass, high values.

    AmpTechTools
    Show
    Set Descending Direction