Hello...

It looks like you are visiting our site on a browser that is really old. Unfortunately, this means you can't get the full experience. It'd be awesome if you could upgrade to a modern browser, especially Chrome and Firefox as that is the best out there right now.

Copyright 2014. All Rights Reserved.

    Attenuators

    Attenuators
    Show
    Set Descending Direction
    • 1
    • 2

    1/4" Male to Female speaker cable. 48" long. 16ga wire

    4ft phone plug to phone jack cable

    1/4" Male to Male speaker cable. 96" long. 16ga wire

    8ft phone plug to phone plug cable

    1/4" Male to Female speaker cable. 96" long. 16ga wire

    8ft phone plug to phone jack cable

    Dual male spade connectors on the cable end connect to female spade terminals on the cable that went to the speaker. The other end of that cable connects to the input of the MASS. The other cable plugs into the output of the MASS and the end of that cable is connected to the spade lugs on the speaker. Each cable is 2ft long.

    Attenuator harness for any amp that has a hard-wired speaker.

    1/4" Male to two Female speaker cable. 10" long. 16ga wire

    Y-Cable (To connect more than one cabinet to the output of the attenuator)

    Attach these wings to the sides of your attenuator, and you can mount it in a standard 19" rack. Uses two rack spaces. Must place the attenuator on the topmost spaces of the rack to allow proper ventilation.

    Rackmount Wings for the Standard MASS, MASS Lite,and MASS III Attenuators

    Attach these wings to the sides of your Mass 200 attenuator, and you can mount it in a standard 19" rack. Uses three rack spaces. Must place the attenuator on the topmost spaces of the rack to allow proper ventilation.

    Rackmount Wings for the MASS 200

    Attenuators
    Show
    Set Descending Direction
    • 1
    • 2