Hello...

It looks like you are visiting our site on a browser that is really old. Unfortunately, this means you can't get the full experience. It'd be awesome if you could upgrade to a modern browser, especially Chrome and Firefox as that is the best out there right now.

Copyright 2014. All Rights Reserved.

    Speakers

    Speakers
    Show
    Set Ascending Direction

    TONECVLT 15", 60oz ceramic magnet, 100 watt, 2-1/2" voice coil, cloth-edge curved cone. Large H dustcap, heavy dope.Very Loud, aggressive but smooth, uncolored, huge bottom like an EV, bass cone. For guitar!

    Weight: 11.6 lbs, Diameter: 15.125", Depth: 6.31", Cutout size: 13.75"

    TONECVLT 15", 60oz Ceramic magnet, Can be used for guitar or bass depending on the voice coil chosen - 80w guitar style or 150 watt for bass, 2" voice coil, cloth-edged ribbed bass cone, large H dustcap, heavy dope. Crisp, clear tone with tight low end. (Big natural low end.) Even frequency response.

    Weight: 11.6 lbs, Diameter: 15.125", Depth: 6.31", Cutout size: 13.75"

    Dire Wolf

    $120.00

    TONECVLT, TONE CVLT Our meanest sounding speaker of all.

    12", 60oz ceramic magnet, 100 watt, 2" voice coil, WOLF cone. For high-power applications with aggressive tone with insane midrange punch. In legend, the Dire Wolf is bigger and meaner than a Gray Wolf, so you can bet this is one of our most aggressive and biggest sounding speakers. This one comes alive at higher volumes.

    All TONECVLT speaker orders include a badge to display on the front of your cab, to let everyone know why your tone is so good.

    Note about impedance: we offer these speakers in 12- and 24-ohm as an option, specifically for 6x12 cabinets, which avoids the common problem of some speakers receiving more power than others, but rather balances it out so each speaker can be as full as possible. (24-ohm all parallel = 4 ohm cab. 12-ohm series-parallel = 8 ohm cab)

    Weight: 10.6 lbs, Diameter: 12.19", Depth: 5.25", Cutout size: 10.75"

    Bloodhound

    $120.00

    TONECVLT, TONE CVLT Hunt down big low end.

    12", 60oz ceramic magnet, 100 watt, 2" voice coil, 55Hz ribbed cone. For high-power applications where a deep low end and articulate high end are desired. Sounds great with fuzz. Not for precise and distinct playing as much as raw fuzzy goodness.

    All TONECVLT speaker orders include a badge to display on the front of your cab, to let everyone know why your tone is so good.

    Note about impedance: we offer these speakers in 12- and 24-ohm as an option, specifically for 6x12 cabinets, which avoids the common problem of some speakers receiving more power than others, but rather balances it out so each speaker can be as full as possible. (24-ohm all parallel = 4 ohm cab. 12-ohm series-parallel = 8 ohm cab)

    Weight: 10.6 lbs, Diameter: 12.19", Depth: 5.25", Cutout size: 10.75"

    TONECVLT, TONE CVLT Legendary low end for the most demanding situations.

    12", 60oz ceramic magnet, 200 watt, 2" voice coil, 55Hz ribbed cone. For the most low end and highest power situations. Sounds great with fuzz. Can take a beating without blowing (even if you are trying to get a blown speaker sound). Perfect for downtuned guitars, as well as baritone guitars. Can also be used in conjunction with our Bass12's for an expansive heavy bass cab.

    All TONECVLT speaker orders include a badge to display on the front of your cab, to let everyone know why your tone is so good.

    Note about impedance: we offer these speakers in 24 ohm as an option, specifically for 6x12 cabinets, which avoids the common problem of some speakers receiving more power than others, but rather balances it out so each speaker can be as full as possible.

    Weight: 10.6 lbs, Diameter: 12.19", Depth: 5.25", Cutout size: 10.75"

    TONECVLT, TONE CVLT The clear choice to pair with the Gray Wolf.

    12", 50oz ceramic magnet, 100 watt, 1.75" voice coil, WOLF cone. Strong focus to the low end and lower mids, this is the perfect complement to the Gray Wolf, (which focuses on upper mids and highs.)

    All TONECVLT speaker orders include a badge to display on the front of your cab, to let everyone know why your tone is so good.

    Note about impedance: we offer these speakers in 24-ohm as an option, specifically for 3x12 and 6x12 setups, which avoids the common problem of some speakers receiving more power than others, but rather balances it out so each speaker can be as full as possible. (24-ohm 3x parallel = 8 ohm cab. 24-ohm 6x parallel = 4 ohm cab)

    Weight: 7.9 lbs, Diameter: 12.125", Depth: 5.125", Cutout size: 10.75"

    DT15

    $120.00

    Weber's DT-15 speaker provides warm smooth tone with a big bottom end. The 20oz magnet helps keep the speaker somewhat inefficient, so you can drive your amp into overdrive more easily than with a more efficient speaker. Excellent replacement for any amp with a 15" where you want to get some drive from those amps without a thin and harsh treble.

    15", 20oz Ceramic magnet, 50 watt, 1.5" voice coil, ribbed cone, 3" paper vented dustcap.

    Weight: 7.2 lbs, Diameter: 15.125", Depth: 5.9", Cutout size: 13.75"

    DT12

    $110.00

    Weber's DT-12 speaker provides warm smooth tone with good bottom end. The 20oz magnet helps keep the speaker somewhat inefficient, so you can drive your amp into overdrive more easily than with a more efficient speaker. Excellent replacement for Deluxes, Pro Reverb, and Bassman 50w, where you want to get some drive from those amps without a thin and harsh treble. 12", 20oz Ceramic magnet, 30 watt, 1.5" voice coil, ribbed cone, 3" paper vented dustcap.

    Weight: 5.85 lbs, Diameter: 12.125", Depth: 4.5", Cutout size: 10.75"

    DT10

    $100.00

    Weber's DT-10 speaker provides warm smooth tone with good bottom end. The 20oz magnet helps keep the speaker somewhat inefficient, so you can drive your amp into overdrive more easily than with a more efficient speaker. Excellent replacement for CTS ceramics in Super Reverbs, as well as a solid choice for Princetons and Vibroluxes where you want to get some drive from those amps without a thin and harsh treble. We wish to recognize Willie Whittaker (Lord Valve) for his invaluable input to Ted in designing these 10" speakers years ago. 10", 20oz Ceramic magnet, 30 watt, 1.5" voice coil, inverted-rib seamed cone, 3" paper vented dustcap.

    Weight: 5.2 lbs, Diameter: 10.125", Depth: 4.06", Cutout size: 8.75"

    Weber Speakers is proud to offer Ted Weber's Legacy Series 12 inch speakers with Alnico magnets. These speakers were some of the last designs Ted worked on, and we have perfected his vision (by not doing anything besides producing the speakers). The 'Legacy' line is similar to a group of speakers that we previously built as a 'turn-key' product for a retailer. We have decided to honor Ted's legacy and exclusively sell these speakers via our website. Ted designed these speakers to reproduce the classic 'Marshall' british tone, as faithful to the original sound as he could. 40 oz AlNiCo magnet, 1.75 inch voice coil, 30, 65, or 100 watt. 75Hz or 55Hz cones. Available with standard British dustcap or Large H Screen Dome. Power level: always get more power handling than your amp puts out. Amps can generate more power than their 'ratings' indicate. No speaker is indestructible, so bear that in mind before cranking your Marshall amp and wondering why your speakers are blown. Cone type: 75Hz cone has solid bass, even mids, and good clarity. Your standard "Vintage Marshall" cone. 55Hz cone has deeper bass, a darker voice, and smoother highs. These are great for deep bass notes and creamy tones. Dustcap type: Standard British = even, clear, good for clean and distorted. Large H Screen Dome = smoother highs, takes the edge off high frenquency distortion. (Great for high gain amps that have too much treble in the distortion) Doping: Pre-Rola treatment standard.

    Weight: 7.05 lbs, Diameter: 12.125", Depth: 5.75" no cover, 6.375" with cover, Cutout size: 10.75"

    Weber Speakers is proud to offer Ted Weber's Legacy Series 12 inch speakers. These speakers were some of the last designs Ted worked on, and we have perfected his vision (by not doing anything besides producing the speakers). The 'Legacy' line is similar to a group of speakers that we previously built as a 'turn-key' product for a retailer. We have decided to honor Ted's legacy and exclusively sell these speakers via our website. Ted designed these speakers to reproduce the classic 'Marshall' british tone, as faithful to the original sound as he could. 30, 40, 50, or 80 oz magnet, 1.75 inch voice coil, 30, 65, or 100 watt. 75Hz or 55Hz cones. Available with standard British dustcap or Large H Screen Dome. Magnet size: smaller = less efficient, more breakup. larger = more efficient, louder, cleaner (generally). Power level: always get more power handling than your amp puts out. Amps can generate more power than their 'ratings' indicate. No speaker is indestructible, so bear that in mind before cranking your Marshall amp and wondering why your speakers are blown. Cone type: 75Hz cone has solid bass, even mids, and good clarity. Your standard "Vintage Marshall" cone. 55Hz cone has deeper bass, a darker voice, and smoother highs. These are great for deep bass notes and creamy tones. Dustcap type: Standard British = even, clear, good for clean and distorted. Large H Screen Dome = smoother highs, takes the edge off high frenquency distortion. (Great for high gain amps that have too much treble in the distortion) Doping: Pre-Rola treatment standard.

    Weight: 7.9 lbs, Diameter: 12.125", Depth: 5.125", Cutout size: 10.75"

    Weber Speakers is proud to offer Ted Weber's Legacy Series 10 inch speakers. These speakers were some of the last designs Ted worked on, and we have perfected his vision (by not doing anything besides producing the speakers). The 'Legacy' line is similar to a group of speakers that we previously built as a 'turn-key' product for a retailer. We have decided to honor Ted's legacy and exclusively sell these speakers via our website. Ted designed these speakers to reproduce the classic 'Marshall' british tone, as faithful to the original sound as he could. 30 oz magnet, 1.50 inch voice coil, 30 or 65 watt. 75Hz cones. Available with standard British dustcap. Power level: always get more power handling than your amp puts out. Amps can generate more power than their 'ratings' indicate. No speaker is indestructible, so bear that in mind before cranking your Marshall amp and wondering why your speakers are blown. Doping: Pre-Rola treatment standard.

    Weight: 6.9 lbs, Diameter: 10.125", Depth: 4.125", Cutout size: 8.75"

    Bass 15

    $135.00

    Weber's high-powered speaker designed specifically for Bass Guitar. Crisp, clear, bass tone, with tight low end. Big natural low end. Even frequency response. 15", 60oz Ceramic magnet, 175 watt, 2" bass voice coil, cloth-edged ribbed bass cone.

    Sound clip below!

    Weight: 11.6 lbs, Diameter: 15.125", Depth: 6.31", Cutout size: 13.75"

    Bass 12

    $125.00

    Weber's high-powered speaker designed specifically for Bass Guitar. Crisp, clear, bass tone, with tight low end. Even frequency response. 12", 60oz Ceramic magnet, 175 watt, 2" bass voice coil, cloth-edged smooth bass cone.

    Note about impedance: we offer these speakers in 24 ohm as an option, specifically for 6x12 cabinets, which avoids the common problem of some speakers receiving more power than others, but rather balances it out so each speaker can be as full as possible.

    Weight: 10.6 lbs, Diameter: 12.19", Depth: 5.25", Cutout size: 10.75"

    Weber's heavyweight high-powered speaker designed specifically for Bass Guitar. Crisp, clear, bass tone, with tight low end. Even frequency response. Thunderous low end for 2x10 and 4x10 cabs -- better bring a dolly! 10", 60oz Ceramic magnet, 150 watt, 2" bass voice coil, cloth-edged smooth bass cone.

    Weight: 9.95 lbs, Diameter: 10", Depth: 4.5", Cutout size: 8.75"

    NeoMag15

    $253.00

    Replacement for JBL D130/F and other 15" applications where a smooth, broad tone is desired.

    15" speaker, 4" NeoMag magnet circuit and single layer voice coil with edgewound aluminum wire designed to have the same magnet circuit energy and voice coil force characteristics as the original AlNiCo D130/F. Broad, smooth, uncolored, strong low end. Original all paper or cloth edge curved cone. Available with paper or aluminum dome

    NOTE: The polarity is reversed from typical Weber Speakers, just like JBL speakers. RED IS NEGATIVE, BLACK IS POSITIVE.

    Weight: 8 lbs, Diameter: 15.19", Depth: 4.625", Cutout size: 13.75" for rear-mount, 14.25 for front-mount

    Speakers
    Show
    Set Ascending Direction